MarTest Cambrian - Mobile Equipment

We proudly present you our

Mobile filtration equipment

Whether it's an ISO tank filtration or storage tank containing 50000 m³, we have the right equipment available to solve your off-spec problem!

Only a small selection of our equipment is displayed on our website. For more info regarding our mobile filter equipment, please contact us!

Our 20ft scrubber setup at a storage terminal, deployed to rectify a parcel of Methanol failing on IMPCA specifications.

Two 20 ft stainless steel scrubber units (PED Category : IV) were connected in parralel in order to complete the filtration of approximately 50.000 m³ in two weeks time.

Customer requirements are made reality at MarTest!

Particle filter units - Rental & service fleet

Our inventory provides a wide range of stainless steel particle filters, developed by MarTest Cambrian.
Dedicated EI-1596 aviation fuel filtration certified equipment available for on-site filtration of JET-A1
Flow rates from 10 m³/h up to 1000 m³/h.
Mesh sizes starting from 0.5 µm
High pressure equipment available for gas filtration (60 bar).
Bag filter units containing up to 19 added area filter bags.
Filter cartridges are available from stock: polypropylene, cotton, stainless steel, glassfiber, etc.
All particle filer equipment is fully certified according to PED/CE including pressure test documentation
Due to relatively small dimensions and weights of our equipment, MarTest Cambrian is able to be on site rapidly and connect practically everywhere

Developed and manufactured by MarTest Cambrian Group
Fully certified according to PED Cat IV/CE including manufacturing data book, design appraisal and pressure test documentation.
Designed and constructed according to EN 13445 Directives.
Replace used absorbent under safe conditions while limiting vapour emissions till ZERO.
Completely stainless steel 1.4404. Fully pressure tested - 23.11 bar test pressure - 15 bar working pressure.
Operating temperatures varying between -20°C and 100°C
Practical dimensions in order to be on site rapidly; Our units can be transported by truck and by air-freght cargo plane.

Small absorber unit (Scrubber)

Big absorber unit (Scrubber)

Developed and manufactured by MarTest Cambrian Group
Fully certified according to PED Cat IV/CE including manufacturing data book, design appraisal and pressure test documentation.
Designed and constructed according to EN 13445 Directives.
Replace used absorbent under safe conditions while limiting vapour emissions till ZERO.
Completely stainless steel 1.4404. Fully pressure tested - 23.11 bar test pressure - 15 bar working pressure.
Operating temperatures varying between -20°C and 100°C
Volume of 8250L - Reconditioning of large parcels without delays.
Stainless steel fixed driptray
Walkway for safe working at heights
Multiple pressure gauges and temperature gauge for process monitoring.
Unit is mounted in a 20 ft contained frame for safe transport and positioning on site.

"we have the right equipment available to solve your off-spec problem!"

Mechanical filtration

Maximum flowrate for mechanical filtration = +/- 1000 m3/h

Iso cleanliness code < 15-12-9
Total contamination rectification
Removal of visible and invisible particle contamination
Dedicated EI-1569 aviation fuel particle + coalescer filter available for on-site filtration of JET-A1 (water content removal)

Chemical filtration

Maximum flowrate for mechanical filtration = +/- 150 m3/h

Water specs < 5 ppm
Chloride specs < 0,25 ppm
Peroxide specs < 1 ppm
Colour specs < 5 Pt-Co
UV specs rectification
And so on...

Magnetic filtration

Maximum flowrate for Magnetic filtration using MAGFIL-300 ATEX filter = 350 m³/h

Removal of magnetic particles at submicron level by means of patented magnetic filtration techniques, developed by MagFil

More info to be found: www.magfil.com